Ruckus Smart Cell Gateway

You are here:
Estimated reading time: 2 min

Open a web browser and log into your Ruckus SCG

 Click on Configuration > AP Zones on the top menu and then “RADIUS” on the left.

Click on “Create New”. Configure with the below settings:

  • Name: Guest WiFi
  • Type: RADIUS
  • Backup RADIUS support: Ticked
  • Primary Server IP Address: *insert radius_server_ip here*
  • Port: 1812
  • Shared Secret: *insert radius_secret here*
  • Confirm Secret: as above
  • Secondary Server IP Address: *insert radius_server2_ip here*
  • Port: 1812
  • Shared Secret: *insert radius_secret here*
  • Confirm Secret: as above

Press Create New to save

Click on “Create New” again and configure with the below settings:

  • Name: Guest WiFi Acct
  • Type: RADIUS Accounting
  • Backup RADIUS Support: Ticked
  • Primary Server IP Address: *insert radius_server_ip here*
  • Port: 1813
  • Shared Secret: *insert radius_secret here*
  • Confirm Secret: as above
  • Secondary Server IP Address: *insert radius_server2_ip here*
  • Port: 1813
  • Shared Secret: *insert radius_secret here*
  • Confirm Secret: as above

Press Create New to save

 Click on “Configuration > AP Zones” at the top and then “Create New“.

Configure with the following:

  • Zone Name: Guest WiFi

Click Create New

Next, click on the Zone Name you just created. This will provide a new menu on the lower left of the page. Click on “WISPr (Hotspot)” and then “Create New“. Configure with the following:

  • Name: Guest WiFi
  • Type: Registered Users
  • Logon URL: External
  • Redirect unauthenticated users to the URL for authentication: *insert access_url here*
  • Start Page -Redirect to the following URL:*insert redirect_url here*

Under “Walled Garden” click on “Create New” and add the following domains one by one:

*.*insert access_domain here*

www.google.com

www.google.co.uk

*.google-analytics.com

*.venuewifi.com

*.openweathermap.org

*.cloudfront.net

If you wish to support social network logins, you also need to add the domains below for each network you plan to support. 

Click on “WLAN” on the left menu and then “Create New“. Configure with the below settings:

  • Name: Guest Wi-Fi
  • SSID: Whatever you want to broadcast as your wireless network name (SSID)
  • Type: Hotspot Service (WISPr)
  • Authentication Method: Open
  • Encryption Method: Open
  • Hotspot Service: Guest Wi-Fi
  • Authentication Service: Use SCG as Proxy -Guest WiFi
  • Accounting Service: Use SCG as Proxy -Guest WiFi Acct

Under “RADIUS Options” set:

  • Called STA ID: AP MAC

Click on “Create New / Apply” to save

Next, click on Configuration > (v)SCG system and on the left select “Northbound Portal Interface“.

If you already use a custom password, you do not need to modify this, however if you have not yet set a password, please enter one now. This password will need to be entered into the Portal later.

To complete the set up you will need to log in to your portal, and under “Management> Venues > Edit Venue > Options” you will need to enter your SCG Public IP and the Password from above. This allows our system to talk to the SCG for authenticating users etc.

 

Was this article helpful?
Dislike